OK... please note each style and length of screw when you remove it as there are several kinds in the radio and they need to go back where they came from

1. Remove radio from bike and sit on bench (easy part).

2. Remove 2 screws from each handle on radio.

3. Remove 2 screws from each side of radio about midway down.

4. Remove 6 screws that hold the casing to the radio (turn radio face down and you will see them).

5. Remove 4 screws from back of radio that hold the wiring harness to the casing.

6. You should be able to remove the case from the radio now.

Please note, author accepts no liability whatsoever for the information contained in this article. It is provided as is. You will need a good #2 Phillips screwdriver, good #1 Phillips screwdriver, rubbing alcohol, clean rag, patience, and an hour or so. If you want to replace the tact switches at the same time, click here as they can be done at the same time.